Tablet Section

Double Cone Blender – Dry Powder Mixing Cone Blender


Technical Specification of Double Cone Blender





























































































Capacity
/ Kg
10 25 50 100 150 200 250 300
Gross Vol 35 80 150 300 450 600 800 900
Volume / Ltrs 10 50 100 200 300 400 500 600
Motor Hp 0.5 1 2 3 5 5 7.5 7.5
Gear Box 1.75” 1.75” 2” 3” 4” 4” 5” 5”
Butterfly Valve NA NA NA 200 200 250 250 250
Safety Guard NA NA YES YES Yes YES YES YES
Discharge Ht 300 300 450 450 450 450 450 450


Double Cone Blender Salient Features



  • The conical shape at both ends enables uniform mixing and easy discharge.
    All contact parts of Double Cone Blender are made out of stainless 304 or 316 quality material, as required by customer.

  • Maximum care has been taken to ensure safe operation of the unit.

  • Manual rotating facility with hand wheel for inching. The same will be provided with ss cover & limit switch. ( In 200 Kgs. & above model )

  • Two nos. of safety road will be provided at back side. ( One LH side & one RH side )

  • Suitable size of butter fly valve at one end of the cone provided for material discharge & hole with openable cover provided at other end of the cone for material charging & cleaning.

  • One shaft with 04 nos. of fixed buffels with mirror polished provided inside the cone.

  • Cone will be mirror polished from the inside & outside & structure will be matt polished.

  • All moving parts of Double Cone Blender covered with SS304 covers.

  • Safety guards made from SS304 pipes provided in front of the m/c with limit switch.

  • Panel fabricated from SS304 material with facility of three phase indication, D.O.L. tarter, digital timer & Amp. Meter.

  • As per customer requirement machine will be provided with left side drive or with right side drive.

  • The conical shape at both ends enables uniform mixing and easy discharge.

  • All contact parts are made out of SS304 / 316(as per customer requirement) quality material.

  • Maximum care has been taken to ensure safe operation of the unit.

  • Worm reduction gear use for speed reduction.

  • Food grade rubber gasket will be used on both end of cone as well as in butterfly valve.

  • Inside & outside of the cone will be polished to the mirror finished.

  • General structure made out of SS304 and Polished to the matt / mirror finish
    (as required by you) in GMP Model.

  • All safety guards & covers made out of SS304 in GMP Model.

  • Hand wheel will be provided for manual tilting of cone.

  • Safety guards provided with limit switch to not start the machine when safety guards are not in proper position.


Video
Photos
Double Cone Blender
Cone Powder Blender