Shree Bhagwati is one of the world leader biggest manufacturer and exporter of labeling machines ,sticker labeling Labeling machine, self adhesive labeling Machines, labeller, wrap round labelling machine, washing and air jet cleaning machine, Rotary Washing Machine, injectable powder filling machines, dry syrup powder filling machines, liquid filling machines, vial filling machine, rotary filling machine, capping machines, ropp bottle capping machine, pp vial capping machine, rotary capping machine, complete tablet bottle packing lines, dry syrup powder filling lines, packaging machines and liquid filling lines for pharmaceutical, Pesticides, cosmetic, chemical, food, ayurvedic and herbal industry.

About Us

Client List

Product Range

	Washing Section

	Liquid Filling Section

	Powder Filling Section

	Capping Section

	Labelling Section

	Inspection Section

	Turn Table Section

	Blister Packing Section

	Tablet Section

	Tablet Press Section

	Tube Filling Section

	Other Products Section

An ISO 9001:2000 Company

Manufacturer and Exporter of Six Head ROPP Cap Sealing Machine for Bottles.

Powder Filling Section

SAF-D-100 Automatic Double Head Auger Type Powder Filling Machine

SAF-D-100 Automatic Double Head Auger Type Dry Syrup Powder Filling Machine is a compact model used for filling Dry Syrup Powder in bottles.

Operation

The incoming dry bottle (sterilized and siliconised) are fed through the infeed Turn Table with suitably guided on the moving delrin flat conveyor belt at the required speed for feeding. There are two separate filling head mounted on machine top plate in the same line. When bottle reaches to the first filling station, it will be held by the pneumatic bottle holder.

Immediately it will be sensed by the bottle sensor as soon as it gets signals from sensor from magnetic clutch starts to rotate which is mounted on auger shaft. It will fill the desired amount of powder to the bottle through auger, where rotation time is previously saved in PLC control. After filling of first bottle pneumatic piston goes back and release the first bottle to move on conveyor, By the same time second bottle also moves along with the first bottle in empty condition. In second filling head same operation will be performed but this time second bottle get filled and first bottle moves further for next operation. The main advantage of this machine is Pneumatic bottle holding system is directly connected with Auger rotation, so till bottle get filled with powder as per set value pneumatic system will not going to release the bottle.

Salient Features

Total Compact cGMP model.
All parts and assemblies coming in contact with powder are made of S.S.316
"NO BOTTLE, NO FILL" System eliminates wastage of costly powder.
Conveyor driving is through High quality imported Gear motor.
Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
Total PLC control for the machine.
No change parts are required for any change in bottle diameter from 30 to 120 ml.

Utilities (To be Provided by Buyer)

Pneumatic Air:

Filtered, oil free, sterile low pressure AIR at 6 kg/cm2

Basic Machine

Imported Gear Motor for Conveyor drive.
A.C. Frequency drive for Conveyor drive.
"No Bottle, No Filling" System.
PLC control for machine.
Pneumatic bottle holding system.

Machine Specifications

Model No. :

SAF-D-100

Direction :

Left To Right

Production Rate :

Up to 60 to 80 Bottles / Min.

Fill Capacity :

10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density
of powder.

Accuracy :

± 2% depending upon consistency and the Uniformity of bulk density of powder Under controlled level of Humidity (i.e.
35%)

No. of Hads :

Two

Electrical Supply :

2.00 HP For Main Drive

0.25 HP For Conveyor.

Power Requirement :

440 Volts, 3 Phase (4 wire System) 50 Hz.

Height of Conveyor:

Adjustable from 850 to 900 MM

Dimensions:

2200 MM (L) x 1102 MM (W) x 1817 MM (H)

Net Wight :

550 KGS. (Approx.)

Gross Weight:

800 KGS. (Approx.)

Input Specification

Bottle Conveyor:	25 mm To 70 mm MAX.
Height	55 mm To 110 mm.

Back

Top

Powder Filling Machine		MODELS
	Automatic Bottle Unscrambler
	Automatic Air Jet Bottle Cleaning Machine
	Offline / Semi Automatic Rotary Bottle Washing Machine or Automatic Linear Tunnel type Bottle Washing Machine
	Automatic 12 Head or 16 Head Rotary Dry Syrup Powder Filling Machine with fill range upto 30gms. Or upto 65gms.
	Automatic 12x8 or 16x8 Rotary Monoblock Dry Syrup Powder Filling with Capping Machine with fill range upto 30gms. Or 65 gms.
	Automatic Four Head Rotary ROPP (Aluminium) Capping Machine
	Automatic Four Head Rotary Screw (plastic) Capping Machine.
	Automatic ARSHAD make Induction Sealing Machine.
	Twin Track 3x2 or 4x2 seated Inspection conveyor with Black & White board and Light.
	Automatic Sticker Labelling with various options of online coding on labels. Machine available with various customised optional features.
	8 Feet or more length PVC Packing Conveyor.
	Turn Tables available in various sizes of 600mm, 750mm, 900mm, 1200mm and 1350mm Diameter
	Automatic Volumetric Linear Filling Machine Bottle
	Automatic Volumetric Linear Filling Machine Vial
	Automatic Wet Glue Labelling Machine	GHL 150
	Automatic Wet Glue Labelling Machine	GHL 300
	Automatic Twelve Head Aluminium Cap Sealing Machine	SBCS-500
	Automatic Six Head Ropp Cap Sealing Machine (For Bottles)	SBCS-200R

Web Design and SEO by Opal Infotech