Automatic Auger Type Dry Syrup Powder Filler Machine
Technical Specifications of Auger Type Dry Syrup Powder Filling Machine
|Direction||Left To Right.||Left To Right.|
|Production Rate||Up to 30 to 40 Bottles / Min||Up to 60 to 80 Bottles / Min.|
|Fill Capacity||10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.||10 grms to 50 grms. (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.|
|Accuracy||± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)||± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)|
|No. of Heads||Single||Two|
|Electrical Supply||1.00 HP For Main Drive.|
0.25 HP for conveyor
|2.00 HP For Main Drive.|
0.25 HP for conveyor
|Power Requirement||440 Volts, 3 Phase (4 wire System) 50 Hz.||440 Volts, 3 Phase (4 wire System) 50 Hz.|
|Height of Conveyor||Adjustable from 850 To 900 mm||Adjustable from 850 To 900 mm|
|Dimensions||1524 mm (L) X 1105 mm(W) X 1800 mm (H)||2200 mm (L) X 1102 mm (W) X 1817 mm (H)|
|Net Weight||400 KGS. (Approx.)||550 KGS. (Approx.)|
|Gross Weight||600 KGS. (Approx.)||800 KGS. (Approx.)|
|Bottle Diameter||25 mmTo 70 mm MAX.||25 mm To 70 mm MAX.|
|Height||55 mm To 110 mm.||55 mm To 110 mm.|
|Pneumatic Air||Filtered, oil free, sterile low pressure AIR at 5 kg / cm2||Filtered, oil free, sterile low pressure AIR at 6 kg / cm2|
- Total Compact c GMP model.
- All parts and assemblies coming in contact with powder and rubber stopper are made of S.S.316 and easily removable for mandatory Autoclaving / Sterilization.
- NO BOTTLE, NO FILL System eliminates wastage of costly powder.
- Conveyor driving is through High quality imported Gear motor
- Machine speed can be adjusted by A.C. Frequency drive, which is time saving.
- Machine is provided with delrin conveyor belt to avoid sticking of vial on conveyor.
- Single track bottle movement, reduces setting of supporting guide rails and semi skilled person can also easily operate the machine.
- Pneumatic bottle holding system is connected with auger rotation, which eliminates chances of bottle transfer before completion of filling operation.
- No change parts are required for any change in bottle diameter from 30 to 120 ml.
- Imported Gear Motor for Conveyor drive.
- A.C. Frequency drive for Conveyor drive.
- No Bottle, No Filling System.
- Pneumatic bottle holding system.