The automatic bottle unscrambler is designed to provide a loading solution for empty containers and delivers them to the downstream equipment conveyor in upright condition after orientation. Machine is having a very robust and vibration free body constructed on steel frame. SS cladded body, and SS container contact parts ensures durability and GMP compliance. User friendly and variable speed controls for orientor and conveyor, make the bottle orientor easy to adjust and able to handle different bottle sizes and shapes.
Empty containers are loaded into the easy access bulk hopper. An elevator lifts the empty containers from the bulk hopper and deposits them into the centrifugal feeder. In the feeder containers are moved to the outside of the bowl and drop into the tooling channel. The tooling channel will ensure the container is in proper position to enter the spacing belt. The spacing belt maintains positive control over the containers and ensures properly timed containers enter the orientation belt work area. Spacing belt will determine the overall speed of the machine. As the containers enter the orientation area, gripper belts pull the container and hook will raise the container in upright position if the neck is exposed. Bottom exposed containers will pass through and all reach the pivot block then. Pivot block forces the containers to orient upright. Containers then pass from a gripper belts towards exit belt. Secondary landing plate keeps doing minor adjustments in orientation of the upright containers until it delivered on to the next conveyor.
Technical Details of Bottle Unscrambler
Up 4000 to 8000 bottles
Direction of Movement
Left to Right
2700mm(L) x 1300mm(W) x 1550mm(H)
Un- scrambler Motor Bottle Elevator Motor
0.5 HP / 415 volt / 50 Hz / 1350 RPM
0.54 Kw – 6 Nos.
No. of Operator
Height of Conveyor
860 mm to 910mm
* Depends on Container size & container characteristics.
** We can supply as per customer requirements.
Robust and vibration free construction.
Elegant matt finish body.
ACVFD for Elevator, feeder and orientor.
User friendly & maintenance less design.
Low noise lever at higher speed.
Contact parts are resistant to flaking, chipping, scuffing so will not cause any cosmetic damage to containers.
Confirms GMP and food standards.
3Ø+ Neutral +Earthing
Voltage & frequency
415V / 50 Hz AC
Inlet Air Pressure
5 To 6 Bar
Required air Quantity
Note: Dimensions & Technical Details are subject to change as per customers’ requirement without any further notice.