SBCS-200R Automatic Six Head ROPP Cap Sealing Machine is a compact model used for sealing of ROPP Caps on the bottle.
Previously filled bottles with Dry syrup powder or liquid syrup are continuously fed from filling machine to the flat conveyor belt of sealing machine and move further through infeed worm for correct spacing between two bottles and transferred to the infeed star wheel. ROPP caps kept in orientation unit automatically orient caps in right direction before entering into delivery chute. And Bottle is entering below the sealing head, consist of total four rollers. Two rollers properly Skirts, Spins and Seals the cap and and simultaneously another two roller performs perfect threading according to bottle neck diameter. After sealing operation, sealing head moves upward with the help of cam and bottle move with exit starwheel and move further on conveyor belt for next operation.
Technical Details of Ropp Cap Sealing Machine (For Bottles) SBCS-200R
|Left to Right|
|Upto 60 to 150 bottles/min.|
|1.00 HP for Main Drive 0.25 HP for Orientation unit|
|No. of Sealing Head|
|440 Volts, 3 Phase (4 wire system) 50 Hz.|
|Height of Conveyor|
|Adjustable from 800 to 850 mm|
|1830 mm (L) x 961 mm (W) x 2130 mm (H)|
|650 Kgs. (Approx.)|
|800 Kgs. (Approx.)|
|22 to 60 mm Maximum.|
|55 mm to 110 mm Maximum.|
|22, 25, 28 & 32 mm Diameter|
(with the help of change parts.)
- Parts coming in contact with the bottle or the Aluminum cap or exposed to the atmosphere are made out of stainless steel or duly powder coated for good house keeping and good manufacturing practice.
- Single motor synchronies conveyor, starwheels and sealing head. The speed can be varied by the % speed pot on operating pane.
- A special clutch device is incorporated on the Starwheel system for stoppage of machine in the event, bottle is turned or over diameter.
- A photo sensing device stops machine automatically in the event, there is no ROPP cap in delivery chute.
- Sealing pressure can be varied to suit different gauges and sizes of ROPP caps.
- Damaged cap quantity be reduced by adjusting the gap between upper and lower plate of orientation unit
- Imported Gear Motor for Main drive Imported Gear box for orientation unit
- A.C. Frequency drive for Mai9n drive
- Digital counter for counting number of sealed bottles
- No Seal in Chute, Machine Stops System
- Acrylic cabinet with Aluminium Structure for Machine.
Note:(1) Right of technical improvements & modifications reserved (2) All illustrations and dimensions are shown for information only