Online Only

Mmc 1600 Tod Automatic Aerosol Filling Capping Machine



Add to Wishlist
Add to Wishlist

The machine consists of seven units :

  • Conveyor with forward and back ways
  • Rotating empty container feeder
  • Rotating liquid filling and valve crimping star system
  • Rotating gas filling star system

The Working Principle

The operators put the empty containers on the rotating feeder table and by the rotating feeder the containers start to move on conveyor automatically.

On the 2nd unit, empty containers enter rotating star system to be filled and crimped automatically. There are 2 filling nozzles and 1 crimping head. The filling process is a completing system which is on the first nozzle the container gets filled half, on the 2nd nozzle the remaining part of container gets filled, this system makes the filling process much faster and efficient. After the filling process the operator puts the valves manually on the already filled containers, then these valves are crimped automatically.

After the filling and crimping process the containers move on to 3rd and last unit which is gassing. There are 2 gassing heads ( according to your demand, it can be 4 pieces as well, it is up to the volume of the gas to be filled in container ) After the gassing process, while the containers move on the conveyor until boxing , the operators put the actuators, and hoods on valves to end the manufacturing process. The operating and maintenance of the machine is very easy and simple.

The machine does work only if :

  • Enough air pressure provided
  • Conveyor is moving
  • Liquid filling wouldn’t start if the container is not in place.
  • Crimping wouldn’t start if the container is not in place
  • Gassing wouldn’t start if he requested gas isn’t provided
  • Filling of liquid and gas pumping are volumetric and with high accuracy. The machine is pneumatic , and only the conveyor motor is electrical.
  • Pneumatic parts are made by WERKOM ( Italian made )

  • Length of Conveyor : 6000mm , 304 stainless steel
  • Rotary Container Feeding Table : 800 mm x 1000 mm , 304 stainless steel
  • Height of Conveyor : 850 mm
  • Height of Machine : 1650 mm
  • Width of Machine : 1050 mm
  • Length of Machine : 6600 mm
  • Liquid Filling Volume Range : 25 ml – 250ml , 2 nozzles
  • Capping Unit 1 unit
  • Gas Filling Volume Range : 10 ml – 200 ml , 2 nozzles
  • Star System : 35-45-52-58-66mm , 10 pieces
  • Sensitivity of Filling : + / - % 0.3 gram
  • Control System : Pneumatic Werkom brand
  • Gas types to be Filled : LPG , FRON DIMETILEN ETER
  • Capacity : 3.000 pieces / hour
  • Air Pressure : 8 bar
  • Air Consumption : 1.800 liters / minute