Tube Filling Machines

Toothpaste Manufacturing Plant – Toothpaste Making Machine

All Contact Parts of toothpaste plant are Made Out of SS 316 / SS 316 L Quality Material Conforming to cGMP norms.

All pipelines are electro - polish from inside and joints are easy openable & fitting after cleaning.

Complete Lid lifting arrangement to facilitate cleaning and product change over, interlocked with safety device so that anchor stirrer starts onllllly when lid closed.

Intensive mixing by special smi - contra design anchor stirrer avoiding dead zones. Contra Rotary Stirrer for Tooth Paste.

Toothepaste manufacturing plant offers Variable Speed drive is provided for main anchorstirrer asembly for different speeds.

All transfer are done under vacuum to avoid any hand touch & Contamination. (Complete untouched process).

Bottom Entry angular homogenizer provided to ensure proper emulsification & homogenization of the product.

Bottom homogeniser is provided with double cartridge mechanical seal with TC/TC seal face, with cooling water arrangement for the mechanical seal and water detection sensor to trip the motor if the fow of water to the mechanical seal is stopped, ensuring thorough safety of the seal due to its high speed application.

Specially Designed inline filters are provided in toopaste manufacturing machines to ensure proper filteration.

Transfer (Lobe) pump provided to transfer ready product from main mfg.Vessel to storage or filling area.

Digital metering pump provided for transrring exact volume of cream from storage vessel to hopper of tube filling packaging machine.<

Pressure and vacuum tight mixing vessel.Full operation through single control panel.

PlC based control control panel with graphics and colour touch screen display for process automation. (optional)

Load cell for online weighing is optional in toothpate machine. FLP motor with FLP push botton station (Optional),/

Product Recovery System : for recovering final product from pipelines and helps in toothpaste manufacturing plant easy cleaning. (Optional)

SHREE BHAGWATI Group is processing and packing solutions

Wax Vessel:

Open top with top Entry agitator Cowl disc type or paddle with Slow Speed Anchor.
Close top with top/bottom entry agitator Cowl disc type or propeller type stirrer.

Choice of various types of anchor design.
Homogeniser (option) – Top Entry, Side Entry, Bottom Entry with circulation facility.
Hydraulic lid lifting for fast & easy cleaning of top dish & vessel.
Load Cell for fast & accurate measuring system.
Flexible product transfer pipe & fitting in case of a load cell & hydraulic lifting.
VFD for Anchor agitators, Homogeniser to vary the RPM.
Specially Design drives assembly.

Material Transfer Pump to Transfer material from manufacturing Vessel OR Planetory Mixer to Storage Vessel & Storage Vessel to Ointment (Tube) Filling M/C. (02 nos.)
This system consist of a closed circuit manufacturing facility from feeding of Wax / Water Phase to loading the hopper of filling machine.
The Wax and Water at required temperature are transferred to Manufacturing Vessel or Planetory Mixer, by vacuum through conical filter.
The product during emulsion formation is recalculated through Ointment Transfer Pump The Pump also discharges the product in the Storage Vessel.
The Storage Vessel is then taken to the filling area and is connected to again Ointment Transfer Pump. Or Storage Vessel remain fixed ( In bigger size ) & pump transfer the ointments in the hopper of the Ointment Filling Machine.