Collating Bundling Shrink Wrapping Machine, Shrink Wrap Machine Manufacturers & Exporters

Semi Automatic shrink wrapping System will be suitable to accept your pack. The machine shall have an output of 3 to 8 packs/minute. The machine shall consist mainly of three sections.

Pusher

• The Pneumatic Pusher will be In line with the machine It will carry the bottles arranged in the required matrix up to the wrapper. After the operator presses two hand operated switches, The Pusher then returns to the normal position for the next cycle.
• After the Pusher returns the operator places the bottles for the next cycle.
• The Pusher side guides are adjustable to accommodate various sizes and matrix of bottles.

Film Wrapping

• The pack which is transferred from the feeding table to wrapper conveyor carries the film along with it.
• A Moisturized Film Unwinding system shall be provided to unwind adequate amount of film required for wrapping. A film guide roll and guide bush shall be provided. The necessary sensor photocell shall be provided to ensure an availability of free un winded film during the sealing operation. A dancing roller with a proximity switch shall be provided to unwind the necessary film.
• The front sealing jaw shall have a sealing of suitable width. This jaw will have a continuous arrangement for cutting and sealing of film. The temperature of the sealing head shall be controlled with help of a Temperature Controller ( Continuous Heating ). The necessary air cooling arrangement for the sealing head will be provided. Incase of machine with side sealers the same shall be provided.
• At the time of wrapping the pack shall also be held from top with the help of an Pneumatic arrangement. The push of the next pack transfers the bottles onto the Shrink tunnel Conveyor Belt.

Control Panel

• An aesthetic control panel made from Mild steel shall be fitted alongside the machine.
• All the components used like contactors, relays, rotary switches, timer, limit switches shall be of reputed makes and shall have capacities taking into consideration the safety factor of the worker and the machine. A Logic Controller will be provided for automatic functioning and operation of the machine in the required sequence.
• The front sealing jaw shall have a sealing of suitable width. This jaw will have a continuous arrangement for cutting and sealing of film. The temperature of the sealing head shall be controlled with help of a Temperature Controller ( Continuous Heating ). The necessary air cooling arrangement for the sealing head will be provided. Incase of machine with side sealers the same shall be provided.
• All the parameters of the system shall be controlled by the Panel. The sequence of operations of the machine shall be suitably interlocked for optimum safety.

Utilities Required

POWER	3 Phase, 440 VAC 50 Hz, 9-11Kw.
COMPRESSED AIR	7 to 9 cfm at 80 psi. (Buyer’s Scope)
MACHINE SIZE	3600x1150x1550mm (LxWxH).
MACHINE WEIGHT	1100 Kgs.