Technical Specification of Injectable Dry Powder Filling Machine
Model |
ATPF-125 |
---|
Direction |
Left to Right |
Production Rate |
Up to 120 fills / Min for Single Dose
Up to 60 fills / Min for Double Dose
Up to 40 fills / Min for Triple Dose
Up to 30 fills / Min for Four Dose |
Fill Capacity |
50 Mg to 1.5 Grms. Single Dose (With Change Parts), 1.5 Grms to 6 grms. Double, Triple and Four Dose. Fill range depending upon vial opening and bulk density of injectable powder |
Accuracy |
±1% depending upon consistency and the uniformity of bulk density of injectable powder, under controlled level of humidity (i.e.25%) |
Electrical Supply |
1.5 HP For Main Drive.
0.50 HP For Unscrambler
0.50 HP For Scrambler. |
Power Requirement |
440 Volts, 3 Phase (4 wire System) 50 Hz |
Height of conveyor |
Adjustable from 800 to 850 MM |
Dimensions |
3028 MM (L) X 1093 MM (W) X 1885 MM (H) |
Net Weight |
800 Kgs. (Approx.) |
Gross Weight |
1200 Kgs. (Approx.)
|
Note:(1) Right of technical improvements & modifications reserved(2) All illustrations and dimensions are shown for information only